First, the name of the vaporizer product
According to the working principle, the vaporizer generally has an air bath type vaporizer, an electric heating type vaporizer, and a steam heating vaporizer. The low temperature liquid gas is used for heat exchange with air or heated water vapor, so that the low temperature liquid gas is converted from a liquid state to a gaseous state, and the vaporizer generally uses aluminum. Material production. It is usually used in liquid oxygenation, liquid nitrogenation, liquid argon gasification, liquid carbon dioxide gasification, LNG liquefied natural gas gasification, and some low temperature liquid gas gasification.
Second, the characteristics of vaporizer products
Easy to install and easy to maintain
Special aluminum heat exchange, high efficiency, lightweight design, long service life
Special Φ200 super large diameter special aluminum for s heat pipe, defrosting speed is extremely fast, effective inner fin structure, greatly improve the heat exchange effect of heat exchange tube
"Bridge" type connecting elements are beautiful and generous, eliminating the stress caused by heat expansion and contraction in various parts during work.
Special heat treatment tube surface oxidation treatment process
Optimize the process design to reduce the pressure drop to a low level, no drift phenomenon, and ensure that the flow rate is controlled within the safe range
Sufficient design margin
Advanced high-pressure pipe composite technology, which makes the pressure pipe and the heat exchange pipe 100% fully contact, ensuring heat exchange efficiency
All gasifiers are cleaned and manufactured in full compliance with oxygen service standards for safer use
Can be designed and manufactured according to electronic standards
Design conditions: temperature -10 ° C, relative temperature 70%, continuous use of 8-12 hours of gasification
Note: Factors affecting gasification are: work cycle, ambient temperature, humidity, altitude, wind, light, pressure, adjacent buildings, etc.
Applicable medium: LO2, LN2, LAr, LNG, LCO2, LC2H4, LPG, etc.
Working pressure: 0.8-35.0MPa
Single flow: 50-8000NM3/h, larger flow can be combined
Third, the use of vaporizer products
It is usually used in liquid oxygenation, liquid nitrogenation, liquid argon gasification, liquid carbon dioxide gasification, LNG liquefied natural gas gasification, and some low temperature liquid gas gasification.
Fourth, the vaporizer common product specifications
Generally, a single vaporizer has a specification of 50-8000 NM3/h, and a larger flow rate can be combined.
Corresponding parameter set not found, please add it in property template of background
10 cubic meters or more cryogenic storage tank