Service hotline：+86 40009 63336

Sitemap | 鲁ICP备17045620号网站建设：中企动力青岛

Links:

Online consultation

Working hours: Daily 08:00-23:00
Welcome to add QQ customer service consultation
QQ: 1968322180

+86 40009 63336

Welcome to call the national hotline
Working hours: Daily 08:00-20:00
Complaint call: +86-532-80969903

Micro-channel public platform

Alibaba online shopping mall

Home page

Products

Dewar

Liquid nitrogen dewar

Products

Liquid nitrogen dewar

Product description

First, the product name

Liquid nitrogen dewar tank welding insulated gas cylinder oxygen nitrogen argon dewar tank dewar gas cylinder nitrogen industrial bottle industrial bottle

Second, the main performance characteristics

1. It is mainly used for transporting and storing liquid oxygen, liquid nitrogen, liquid argon, liquefied natural gas and liquid carbon dioxide.

2. High vacuum multi-layer insulation is adopted to ensure low evaporation rate.

3, built-in vaporizer automatically provides 10Nm3 / h stable continuous gas.

4. The gas-saving device preferentially uses gas phase space overpressure gas.

5, the use of international common CGA standard joints, all imported valve configuration.

6, unique damping ring design to meet frequent transportation requirements.

7. Applicable to: electronics, scientific research, chemical, welding, LNG supply and other industries.

Third, commonly used liquid nitrogen Dewar tank specifications

1. Medium voltage product specifications

Product number		DPL-175	DPL-195	DPL-210	DPW-499
Dimensions mm		Φ505×1551	Φ505×1675	Φ505×1761	2113×760×995
Working pressure (MPa)		1.37	1.37	1.37	1.59
Safety valve take-off pressure (MPa)		1.59	1.59	1.59	1.89
Bursting pressure (MPa)		2.41*	2.41*	2.41*	2.41（2.86*）
Geometric volume (L)		175	195	210	499
Effective volume (L)		160	180	195	460
Evaporation rate (liquid nitrogen)		2.1%	2.02%	1.99%	1.7%
Empty bottle weight (kg)		125	135	140	345
Filling quality	Oxygen (kg)	170	190	205	478
	Nitrogen (kg)	120	134	145	334
	Argon (kg)	208	232	250	585
	Natural gas (kg)	70	78	84	196

2, high pressure product specifications

Product number		DPL-175H	DPL-196H	DPL-210H	DPW-499H
Dimensions mm		Φ505×1551	Φ505×1676	Φ505×1761	2113×760×995
Working pressure (MPa)		2.3	2.3	2.3	2.5
Safety valve take-off pressure (MPa)		2.41	2.41	2.41	2.86
Bursting pressure (MPa)		3.62*	3.62*	3.62*	3.62（4.14*）
Geometric volume (L)		175	195	210	499
Effective volume (L)		160	180	195	460
Evaporation rate (liquid nitrogen)		2.1%	2.02%	1.99%	1.7%
Empty bottle weight (kg)		143	152	160	405
Filling quality	Oxygen (kg)	170	190	205	478
	Nitrogen (kg)	120	134	145	334
	Argon (kg)	208	232	250	585
	Natural gas (kg)	164	183	197	460

Fourth, special needs customization

1, according to customer needs, 175L, 195L, 210L can be made of outer frame and pulley (499L comes with frame and pulley), convenient for forklifts and short-distance movement.

2, according to customer needs, 175L, 195L, 210L can be made into a double combination or a combination of four, increasing the amount of filling.

3, according to customer needs, customize the form of excuses needed downstream.

Five, some applications of liquid nitrogen Dewar

1. Gas filling station is used.

2, cutting and welding factory use, instead of compressed nitrogen cylinders, saving costs.

3. Laboratory gas.

Six, matters needing attention

Before filling the cylinder with cryogenic liquid, first determine the filling medium and filling quality of the cylinder. Filling quality can be found in the product specification sheet. To ensure accurate filling, use a scale to measure.

1. Use a special conveying hose to connect the cylinder into and out of the liquid valve (the DPW cylinder is the inlet valve) and connect it to the supply source, and tighten it without leakage.

2. Open the discharge valve and inlet and outlet valve of the cylinder, then open the supply valve and start filling.

3. During the filling process, monitor the pressure inside the bottle through a pressure gauge and adjust the discharge valve to maintain the pressure at 0.07~0.1MPa (10~15 psi).

4. When the required filling quality is reached, close the inlet and outlet valves, drain valve and supply valve.

5. Remove the transfer hose and remove the cylinder from the scale.

Warning: It is strictly forbidden to overfill the cylinder.

Warning: Check the media and filling media in the bottle before filling.

WARNING: Fill in well ventilated areas as gas accumulation is very dangerous.

Note: A fully filled cylinder has a very rapid pressure rise that may cause the safety valve to open.

Note: After you have just started working on liquid oxygen or liquefied natural gas, please be careful not to smoke or get close to a place where there is a fire, because liquid oxygen or liquefied natural gas is likely to be splashed in your clothes.

Note: When the saturated pressure of liquid carbon dioxide drops to 0.48 MPa (70 psi), liquid carbon dioxide forms solid dry ice. Therefore, when using DPL450-175H/195H/210H, DPL450-175V/195V/210V, and DPW650-499H cylinders to fill liquid carbon dioxide, the carbon dioxide gas in the cylinder must be pressurized before it can be filled.

Liquid oxygen dewar

Liquid argon dewar