Products
Standard gas for the power industry
Standard gas for the power industry
Second, the packaging instructions
1 liter, 2 liter, 4 liter, 8 liter aluminum alloy steel cylinder; 40 liter carbon steel cylinder
Third, the component name
SO2 N2 NO N2 H2S
N2 CO N2 CO2 N2
Fourth, the balance of gas - concentration range
Standard gas for analysis of dissolved gases in transformer oil: hydrogen (100-1000), carbon monoxide (100-1000), carbon dioxide (500-5000),
Methane (30-300), ethane (30-300), ethylene (30-300), acetylene (30-300), etc.
Specific concentration can adjust the balance of nitrogen or argon
Standard hydrogen sulfide in sulfur hexafluoride: 5 to 1000 ppm
Carbon monoxide standard gas in sulphur hexafluoride: 5 to 1000 ppm
Sulfur hexafluoride standard gas: 5 ~ 1000ppm
Analysis of impurities in sulfur hexafluoride: hydrogen (5 ppm), oxygen (5 ppm), argon (5 ppm), nitrogen (5 ppm), carbon monoxide (5 ppm),
Carbon dioxide (5ppm), carbon tetrafluoride (10ppm), hexafluoroethane (10ppm), octafluoropropane (10ppm), sulfur hexafluoride
Analysis of impurities in sulfur hexafluoride: hydrogen sulfide (100 ppm), thionyl fluoride (50 ppm), sulfuryl fluoride (100 ppm), carbonyl sulfide (100 ppm), carbon disulfide (100 ppm), helium (balance)
Fifth, the main purpose
Mainly used in atmospheric analysis, environmental monitoring, power applications, transformer oil and gas measurement.
Sixth, packaging specifications
Serial number |
product |
State (meteorological or liquid phase) |
Container (L or m3) |
Working pressure (MPa) |
Container height (excluding bottle valve, bottle cap) mm |
Empty weight of container (excluding bottle valve, bottle cap) kg |
Filling capacity (pressure or weight) MPa or kg |
Supply mode |
Brand |
1 |
Standard gas for the power industry |
Gaseous state |
4L(Φ140) |
15MPa |
395 |
7.1 |
10-15MPa |
Available in cylinder or aluminum alloy cylinders |
Runaway |
2 |
Standard gas for the power industry |
Gaseous state |
8L(Φ140) |
15MPa |
680 |
11.5 |
10-15MPa |
||
3 |
Standard gas for the power industry |
Gaseous state |
10L(Φ159) |
15MPa |
671 |
13.5 |
10-15MPa |
||
4 |
Standard gas for the power industry |
Gaseous state |
15L(Φ159) |
15MPa |
956 |
19 |
10-15MPa |
||
5 |
Standard gas for the power industry |
Gaseous state |
20L(Φ219) |
15MPa |
715 |
23 |
10-15MPa |
||
6 |
Standard gas for the power industry |
Gaseous state |
40L(Φ219) |
15MPa |
1315 |
48 |
10-15MPa |
||
7 |
Standard gas for the power industry |
Gaseous state |
50L(Φ219) |
15MPa |
1510 |
66 |
10-15MPa |
||
8 |
Remarks |
Due to differences in container design pressure, etc., the above data is slightly different, please be aware. Please contact 40009 63336 or 18563963366 for details. |
CO: 50~1000ppm
H2: 50~1000ppm
C02: 50~5000ppm
CH4: 100ppm~1%
C2H4: 30~500ppm
C2H6: 30~500ppm
C2H2: 30~500ppm
N2 or Ar balance gas
Eight, matters needing attention
The bottled gas product is a high-pressure filling gas, which should be used after being decompressed and pressure-reduced. The used cylinders are used for a long period of time. All expired cylinders must be sent to a department for safety inspection before they can continue to be used. When using the exhaust gas in each bottle of gas, the residual pressure in the bottle should be kept at 0.5MPa, and the minimum pressure should not be lower than 0.25MPa. The valve should be closed to ensure the gas quality and safety. Bottled gas products should be stacked in storage, storage and use. It is strictly forbidden to stack flammable gas and combustion-supporting gas. It is not allowed to be close to open flames and heat sources. Do not near fire, do not touch oil, do not expose to the sun, do not throw Do not hit, do not conduct arcing or arcing on the cylinder, and prohibit rough handling.